As I did before I used warm water with coffee to make the paper look old. This time I added a bit of brown dye so I don’t need to add so much coffee. Put the pages and wrinkle them once inside the coffee, which will not only change the color of the paper but actually make it look like those ancient pirate maps.. If you the paper looks too old and wrinkly just do the wrinkling before submerging in the coffee. I used a large plastic sheet to let the pages dry… And here are all the pages drying: And here is the final result: To be continued!
The first part was to re-draw the inner pages. I mainly used the archive of pages at the Gravity Falls Wiki as reference. I decided to make my journal with all the pages available from Journal 1, 2 and 3 put together since that makes for a way larger tome. I took each screenshot, warped it in photoshop to make a flat page. Here are a couple examples. —— The Security Room Page —— Original screenshot: Warped and reshaped: Redrawn in hi res: —— The Percecepshroom Page —— Original screenshot: Warped and reshaped: And then re-drawn in hi-res, in cases like this, I had to invent a lot of the pages since there is a lot that’s never shown. Also, since I wasn’t going to make the whole invisible ink stuff I did a mix of the original text and the invisible ink text. —— The Summoning Page —— Original screenshot: Warped, reshaped and completed: And then re-drawn in hi-res: I’ll post links to all the pages I redrew on the download section.
And thus, the Enchiridion is finally complete!, It took way more time that expected by I think it looks pretty decent. This prop will go to my friend for his birthday (wihch was like 7 months ago..) and I might do another copy for me… but that will have to wait, I’m tired and sleepy age so I shall go into a deathless sleep until next week… see you soon!x
Assembly time! First, the standar wood and leather for the covers. I should have used MDF alone since there wont be any visible part of the cover… A couple of actual copper details for the central piece: And then, a little bit of coffe to give it some color: In this case I used screws on top of the contact cement to attack the front part to the book: The screws came out on the other side so i just cut the tip with a dremel: Finally a bit of coffe to give the pages an old look from the outside:
Lets paint some resin! Here are the resin pieces just taken out from the silicone molds. As you can see, they are quite transparent. All of them: I applied a base coat of very dark mate gray and a coat of acrylic paint (metallic copper): Here is the process including the copper rust effect: Base coat of dark gray or black + copper A coat of green/blue acrylic paint mix Then remove the green/blue paint with a wet rag before it dries Finally, apply judea bitumen and then take if off with mineral spirits To be continued!
Today… yet another tale of epic failure… So… I´ve always heard that “silicone only sticks to silicone”, which I guess might be true with hi quality smoth-on or similar products but I don’t have access to all those futuristic materials so I´m left with a piece of crap silicone that sticks to absolutely any and all materials, maybe someone could use it to find dark matter since I bet it will stick to it.. I usually use talcum as mold release, it both makes it super easy to separate the recin piece from the silicone mold and also gives the pieces a fantastic rough finish which is abolutely wonderfull to paint… Today, I idiotically decided to try making one piece without any release and test the whole silicone sticks-to-silicone-thing, it all went to hell pretty fast… Look at that shit! Now learn from my sadness! To be continued… = (
It´s molding time! After a stupid month of inactivity I`m back so it´s time for some updates… I finally sculpted the bird on top of the skull so the center part was finally done. I decided to cut the plastic around the whole thing so it serves as the base that keeps it all together, also a little bit of paint and shilak for the wood. Now all is ready for moldmaking. First I made a couple containers out of lego (one of humanities best inventions): Then comes the unusual… I had many many problems with leaking molds in the past so I eventually started covering the inside of my molds with a very thin plastic wrap (the one used to cover food); that way I dont need to spend time thinking of sealing the container. here is a close up of the lego mold with the plastic wrap: And here are both molds ready for the silicone: Pouring complete The plastic wrap thing has been a fantastic improvement in my workflow. It saves a LOT of time in building sealed molds with hot glue, it saves a lot of materials for the mold walls and there is the best … Read More
The Enchiridion from Adventure Time – part 5 Today I just added the title to the cover. I was a slow day… I copied the title in photoshop and printed it backwards so I could press it from the back and pass some of the ink to the wood. Then I just filled in the letters with a pirograph. I was also trying diferent things to put instead ofthe gems on the circle… maybe copper nails? who knows…
Just cut the mdf and plywood for the cover/back. I also assembled the text block. Just placed the elements to see how it looks. Looks pretty good.
Wood and epoxy update!